Recent content by webhund

  1. W

    LA211/BX2200 Hydraulic Hose Routing Help Request

    A couple of hydraulic lines blew out on my BX2200 last week, so I thought I would just replace them all while I was at. Good plan, until I forgot to take note of how the hoses were positioned and routed coming out of the valve manifold. It's a really tight fit. Unfortunately, the LA211 parts...
  2. W

    BX2200 Starts, But Stops in "Run" Key Position

    I would appreciate some suggestions on where to start looking to track this problem down: BX2200 starts just fine and will keep running as long as the key is in the "start" position. The second I let the key release to the "Run" position, she stops. This started just today with no odd...
  3. W

    60" MMM Owner's Manual Needed

    60\" MMM Owner\'s Manual Needed My BX just came back with the new bar tires on it and I need to re-adjust the 60" MMM height. Unfortunately, my owner's manual with the "clear as mud" Kubota instructions is nowhere to be found. I've done some searching to see if anyone has posted PDF scans of...
  4. W

    Mowing  60" MMM mowing too low - what to look for?

    60\" MMM mowing too low - what to look for? I put the 60" MMM back on my BX2200 as I'm fairly confident the snow is gone. Mowed the lawn the first time and had to set the height control knob at "TOP" instead of my usual 3.5" setting because the actual cutting height when set at 3.5 is more...
  5. W

    Rake  Front Thatch Rake for BX2200 Needed

    Does anyone know of a front mounted "thatch rake" that will fit a Kubota BX2200 with minimal adjustment/customization? By "thatch rake" I'm referring to those spring-loaded, steel-tined rakes, not the heavy rear-3PT mounted landscape rakes.
  6. W

    Mulching Kit Question re. 60" MMM Deck on BX

    Mulching Kit Question re. 60\" MMM Deck on BX I recently purchased the Kubota mulching kit for the 60" MMM deck. When I went to install it, it was pretty obvious that the left plate (non-discharge side) of the two-piece baffle kit did not fit correctly. There is a gap of about 3 inches...
  7. W

    Need Source for Gator mulch blades on 60" MMM

    Need Source for Gator mulch blades on 60\" MMM Can someone recommend a good source for Gator brand mulching blades to fit the Kubota 60" MMM on my BX2200? I've got the Kubota mulching kit ordered and would like to put Gator blades on it at the same time as I install the mulch kit itself.
  8. W

    "Review": Water Cooler for BX2200 Operator

    \"Review\": Water Cooler for BX2200 Operator If you're looking for a handy one-person water cooler for your BX2200, try the 1 gallon "Victory" cooler from Rubbermaid. I was wandering through a local Target store this weekend, dutifully following SWMBO from aisle to aisle, when this bright...
  9. W

    Tiller  Howard J50 tiller Question

    I've got an opportunity to purchase a refurbished Howard Rotavator J50 and would like to know whether folks here think my Kubota BX2200 could handle this tiller. I would be using it primarily to till a former alfalfa field to about 2" depth. Soil is a medium loam, no clay or any hardpan to...
  10. W

    BX2200 Tiller Choice?

    I am a newbie BX2200 owner and would appreciate advice from more seasoned owners about tillers for the BX. I have about 4 acres of alfalfa to mow and till under this summer in preparation for prairie seeding this fall. I am in central Iowa and have loamy soil, so no clay or particularly hard...
  11. W

    New Kubota BX2200 Owner in Iowa!

    Hello and what a great site this is! I'm a newbie to this site and also to my new BX2200! I've been test driving and talking tractors for a long time, but I finally got a chance to see a BX2200 up close at a local outdoor products show this weekend. I've got a 5 acre alfalfa patch that is...
Top