Got a 28HP commercial briggs in a Ferris zero turn.
It was leaking oil from the sump gasket. Got that all replaced.
On initial startup, the engine revved to the moon.
Shut it down quick, and proceeded to attempt to adjust the governer
I loosened the governor arm on the shaft so I could spin the...
Finally got around to this today.
As noted previously, our wire colors were different in the connector to the regulator. After testing them, we found the pin out to be the same.
Everything works good now.
I adjusted the choke and it fired up rather quickly even with the battery worn down a little!
Thanks for the suggestions!
I posted a before and after photo of the butterfly. And a couple shots if the adjustment screw. I just turned the screw clockwise until the butterfly closed.
The video is...
I just salvaged a 2010 Cub Cadet LTX1040 from a frustrated owner.
It needed a little TLC but overall is in great shape!
I bought a OEM cylinder head gasket kit and replaced all the top end gaskets even though the valve cover was the only one leaking.
I set the intake valve to .005 and exhaust...
Here are some photos of what it takes to convert a K46 to a K57. I have not included ALL parts needed, just the center case and charge pump assembly. This will give you an idea of what is involved.
Here is a photo showing the main components. Center case up top. New input shaft in the...
Hello all. My name is Mike. I live near Pittsburgh, Pa.*
I'm the guy everyone in the family brings their broke stuff to for repairs. I'm not a mechanic by any stretch of the imagination but I don't mind getting my hands dirty.
This years projects included a mini restoration of a '83 yamaha...