Vinnnie's latest activity
-
VVinnnie replied to the thread Starter not getting full voltage.Personally I would convert it to 12 v . Easy enough to do I converted my 900 Ford and have no regrets! Starts easer especially in the...
-
VVinnnie replied to the thread Sickle Bar Can someone identify the make and mode of the 7ft sickle mower?.Looks exactly like mine and it's a massy . Got some parts . . .
-
VVinnnie replied to the thread New Woods rotary cutter - can't slide the plastic PTO guard out of the way.That's what I did!!
-
VVinnnie reacted to dodge man's post in the thread Grease - is there no better way? Can we talk about this? with
Good Post.
My best advice is just live with it and don’t wear nice cloths while on the tractor. -
VVinnnie reacted to masseyrider's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
Years ago I was doing some tractor work for a local nursey. I was supposed to go and rototill a field for planting. I hitched up and...
-
VVinnnie reacted to EddieWalker's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
A Dealer told me that most people use too much grease, and they need to learn to only put in enough to do the job. I've gone back to...
-
VVinnnie replied to the thread Ditch Witch J20 - Battery Keeps Running Down - Wisconsin TJD Engine.I would check the diodes in the alternator...
-
VVinnnie replied to the thread Best Way to Clean up Zero-Turn Seat?.Soap and water !
-
VVinnnie reacted to 4570Man's post in the thread I Went To Purchase A New Mini-Excavator And This Happened..... with Good Post.
That just looks like dirt from sitting outside on the dealers lot for a couple months to me. They could have used a power washer on that...
-
VDon’t think blade weight is the only problem. Every scrape blade I have seen is curved. When facing forward it wants to dig unto the...
-
VVinnnie replied to the thread TYM wants to tip or roll over - need advise.That's an awfully tiny tractor to be lifting that much !! For heavy lifting I have an 1800 Oliver with fel.