Travis_R's latest activity
-
Travis_R reacted to bmaverick's post in the thread Yanmar YM Series Tractor Toolboxes with
Good Post.
There is a thread on this already about 3 or 5 years back. :) Oh, but not on TBN, I posted it all on TractorFroum.com instead... -
Travis_R reacted to bmaverick's post in the thread Yanmar YM Series Tractor Toolboxes with Good Post.
Some models were given no tool box. Instead, the tools were wrapped in a roll-out pouch with two ties like shoe laces. I've hunted the...
-
Travis_R reacted to tacticalturnip's post in the thread Yanmar YM Series Tractor Toolboxes with Good Post.
What a fun thread; I always found it cool Yanmar actually included tools in their toolbox.
-
Travis_R reacted to California's post in the thread Yanmar YM Series Tractor Toolboxes with Good Post.
I should add that the YM240 has the same OEM small flat toolbox as Carey's photo (Post #2 above), on the transmission tunnel in front of...
-
Travis_R replied to the thread Yanmar YM Series Tractor Toolboxes.Excellent information Bret!!
-
Travis_R reacted to bmaverick's post in the thread Yanmar YM Series Tractor Toolboxes with Good Post.
For the YM2500, Travis found this in the YM2500/YM3000 manual. Held on with a single bolt. :oops: Not something I would like to have...
-
Let’s see pictures of the toolbox and where it’s mounted on your Yanmar YM Series tractor. I need some ideas. I would like to add a...
-
Travis_R replied to the thread Adding Guages To your Yanmar.Brand M Parts in Midland, Texas, sells a temperature gauge kit for the YM Series Yanmar tractors. https://brandmparts.com/products/tg0052
-
Travis_R reacted to oldnslo's post in the thread Rotary Cutter Rotary Cutters: Bush Hog or Woods with Good Post.
For light cutting that should work just fine. Around here Woods is common since factory is 20 miles away.
-
Travis_R replied to the thread Rotary Cutter Rotary Cutters: Bush Hog or Woods.I’m looking very hard at the 5’ Rural King branded King Kutter from Rural King. It’s the Professional Series Flex Hitch model with a 40...
-
-
Travis_R reacted to Cycledude's post in the thread Rotary Cutter Rotary Cutters: Bush Hog or Woods with Good Post.
I believe both brands are good. I happen to own a Woods Dixie cutter, bought it new over 40 years ago, it’s kinda beat up from hitting...
-
Travis_R replied to the thread Rotary Cutter Rotary Cutters: Bush Hog or Woods.The Woods BrushBull 60.30 will be the way to go for you. It took the place of the BB60X. The BrushFighter BF5.20 is a brand new model...
-
Travis_R reacted to John_Mc's post in the thread Rotary Cutter Rotary Cutters: Bush Hog or Woods with Good Post.
I've owned a Woods BB60 for 24 years. (Older model designation. Back then the choice was the BB60 or the BB600. The 600 was much heavier...
-
Travis_R reacted to Torvy's post in the thread Rotary Cutter Rotary Cutters: Bush Hog or Woods with Good Post.
I looked at both before deciding a ditch flail mower was better for me. Both are good brands and it will really come down to little...
