TractorTech's latest activity

That is a really old tractor. Parts are available to some degree, but this is not the "580C" which is what made a name for Case and was...

Corn head grease or semi-fluid NLGI #0 grease

Read this from another forum: https://www.heavyequipmentforums.com/threads/rebuild-hydraulic-breaker.106975/

If there are any farmers around you, you can bet that they know how to do it and can show you so you can do it in the future, as it...

I looked at all three 4609 versions, 2013-14, 2014-15 and 4609M, Tier 4 2015-19 and they all show the same fan, hub, pulley assembly...

I like barn cats, don't gotta re-set them! 😂 Good seat warmers, too!

Talk radio left on?

Thank you and the others for the advice in trying to help me with this issue. But I still don’t feel confident that I can do this...

https://www.abilenemachine.com/used-thermostat-housing-am181521m1-u?srsltid=AfmBOor1VU0-BMj7qIyhfPQrA96N6X5olUwnug8J05oso-dMOR5Bbyoc...

Read about it here at the bottom of the screen, on the second page: https://injectionpumps.co.uk/cav-dpa-manuals/

Welcome to TBN! The part (bushing/tophat) attached to the line in the bottom of your 3rd picture is what holds tension and the parts in...

The fuel runs out under the cap. I should say, you are bleeding the air out of the filter, so run the fuel out from under the cap until...

Pretty hard pressed to find an ol ford tractor that ain’t good ;) Thinking eventually I’d like to find a later model power steering...

I don't know that tractor, but possibly could it have a PTO controller that isn't sensing that the PTO is off?

Not good news, but hydrostatic steering would be simpler to install and probably the best solution for a loader tractor. Industrial...