TractorTech's latest activity

I believe I know the cause of the problem. I replaced the hose due to leakage through the hose jacket. I replaced the o-ring at the...

Shovel work isn't something he does much of, but he is aways building or fabricating something or playing with a boat motor, (ie taking...

Yeah, it seems like a glorified shovel, but beats shoveling by hand@

730 system capacity 10.5 gallons plus 6.5 gallons for 750 backhoe, but unless you purge all the cylinders you won't need much more than...

That is the block on the 1210 to tie into. I am pretty sure the front port is pressure for the loader and the back port is return. With...

Engine oil w/filter 7.0 qts Coolant 2.75 Gallons Transmission/rear end 13.8 qts PS 2.0 qts I will find the loader/backhoe for you 730...

There is an adapter block that has to be installed on the top cover assembly to get a supply and return for the loader. It is pictured...

Welcome to TBN! Engine antifreeze - at this point, Prestone mixed to your coldest weather specifications Engine oil - a good grade...

I agree, but the hydraulic oil saved will pay for it quickly, not to mention the mess that it is creating.

Same oring. 87016S95 is replaced by 9961976 and again, I would suspect the fitting 9621483, about $17.00, at this point. Regardless of...

Valid point, but most batwings use single acting cylinders which will quickly show leaking piston seals.

Welcome to TBN! The parts manual shows 9991976 0.070'' Thk x 0.739'' ID 90 Duro. I would look at replacing the fitting as that is where...

Welcome to TBN! Are you sure the issue isn't with leaking cylinders on the batwing? Ram stops would stop it for a predetermined...

Once you open the system you really should run a vacuum to remove any moisture and check for leaks. After a compressor replacement I...

Welcome to TBN! @thepumpguysc is his handle. Parts book, but doesn't show much on Bosch pump...