TractorTech's latest activity

Here you go

Welcome to TBN!

was there a lot of loader work done with the tractor? Just wondering if that could put additional loading or thrust on that assembly...

Yes, but you can buy either the housing bearing assembly (number on casting) OR the bearing insert only. There is a number on the...

Yeah, got that. I haven't looked at or done one of these before and I don't see what the shim in that position does. Tapered bearings on...

Take it to a bearing shop OR look at the bearing number and Google it.

I've been buying Tools at Home Depot and Lowes lately. I get better quality, they have everything, it's priced honest, I can return it...

I had a customer with a 4720 that had blown out the bottom spindle plug, but when I replaced, there was no noticeable wear in the hub...

They look to be standard on the deck, but the tractor appear to be metric

U have to make sure that fuel is getting TO THE PUMP INLET.. THE DPA pump has 1 rotating member that feeds all the cylinders, so it’s...

The link you have is the tool only currently, but here is the link for two XC6.0 5.0Ah batteries and charger...

Or $299 w/ 'free' XC 5.0Ah batt at Home Depot: Milwaukee M18 FUEL 18V Lithium-Ion Brushless Cordless 1/2 in. Impact Wrench with Friction...

Right, like I said in an earlier post, they no longer sell them and yes, low demand most likely. Thanks for sharing the drawing. When...

Thanks for sharing the skid drawing. The old skids can be used as a pattern, but this is great. And, as you show, it is not critical to...

FYI 917 (Bush Hog FH174 or FH188 also) the skid shoes that go on either side are no longer available. Here is a drawing of them. They...