TopSpeed1's latest activity

We’ve used products like this successfully...

If your 1740 is anything similar to my 1736 I believe all the control boxes are located behind the dash, I know for sure the ECU is...

I will try the hood removal. It's too big a chore for my 98lb wife to help with, but I can seek a buddy easy enough. Back about a Month...

for that matter maybe run it w/o hood to see if its ok then? may prove heat getting trapped somewhere causing the issue.

I see some black boxes, a few even under the dash, I'm assuming fuel delivery ecu's (if we even have this) to be under the hood. In...

I know not to start out with non-related components like the lighting or dash modules etc., and yes, the more accessible ones first. (y)...

I can do this without harm :) now just need to know locations of where and what to cool.

I wouldn't rule out any electronic component [over-heating] causing failure. A few weird things to throw into the mix... --Tractor mowed...

No lights (other than forward PTO light) has ever come on while mowing and the power loss occurs. Here's my dash and idiot light lineup...

I know these aren't as sophisticated as our automobiles, but if we did have a limp mode, shouldn't an idiot light of some sorts come on...

I'm currently researching the injectors and possible 3rd party (aftermarket) distributors. I'm not saying the injectors are the issue...

So Lou, you're thinking the ECU is heating up and possibly kicking in a "limp mode" ? Does this series tractor even have a limp mode...

Since this is and has been so puzzling, I would not rule out the turbo, although I do favor injector(s) as my current finger pointer...

I should report to the public, I have been in extensive contact (messaging) with a few members of this and other tractor forums. This...

So at this point and time and as much as this has been baffling (to not only myself), I would not eliminate injectors. I can order a set...