Tinhack's latest activity

Yep, my Ford has a small tubing connection just below the fuel filler cap (in the neck). Excess diesel gets returned to the tank.

Big eagle welcome. I have a couple of crawlers and I’m sure both have bypass lines that end up going to the tank. Mine are Cats. I wish...

I have a home shop. I couldn't even measure that if I wanted to. I have two dial indicators that will measure down to 0.0001" I use for...

You are saying that the primary deck belt has slack- correct? Are the mounting holes at the rear draft arms horribly worn? It's one of...

I've also read that it can damage a fire box because it burns so hot. :oops:

A product called Zero Odor also works to eliminate odors. I got mine off Amazon.

We have zero mouse/rat problems. Zero

No idea about your particular engine or injector pump, but have you confirmed no air leaks from the tank to the pump? A small pinhole or...

Ariens quit making your mower in 1995. Tecumseh quit making engines in 2008. You may find it hard to get parts even it you can find a...

There's a couple of jets, hidden under two brass plugs that get gunked up on these (otherwise great) Kaw motors. Pull the plugs, clean...

Hardware rarely has part numbers. Typically, a parts list will just give the dimensions. You could have taken Part #5 to a hardware...

Looks like a common roll pin to my eye. I have an entire kit of different sized roll pins I got from Amazon years ago. Measure the one...

Your machine but if mine a pair of tin snips would trim that cover back to where you could get access much easier.

I don't think I have enough time left to use that much. Trimming isn't a career for me. :oops:

Same. The 1000 ft. or 500 ft. spools aren't all that much more expensive than smaller spools, so I figured I'd might as well just buy a...