Recent content by ThunderChop

  1. T

    Soft snow plow edges for asphalt

    I have a long asphalt driveway and use my loader & bucket to facilitate snow removal. Have been using a piece of composite decking scraps (Azek is thicker) carriage bolted to the underside of the bucket....works great for snow removal but ice not so much. Does not scratch or gouge the asphalt...
  2. T

    Steel Sawhorses folding leg hands on experience ? Toughbuilt/ Wen Wa/ Bora etc ?

    Toughbuilts x4 for our crew; folds/transport easily into work van and they carry an incredible amount of weight. Best feature for our use is the adjustable height and the ability to make an incredibly sturdy work table...... worth every penny.
  3. T

    Electrical troubleshooting question

    Is the receptacle on the load side of an GFCI somewhere in the circuit? If that GFCI is tripped, then an receptacle on the load side may not function.
  4. T

    New Kubota..loader edge?

    Try a piece of higher end composite decking; I use Azek by Timber-Tech leftover from a deck job; works great and doesn't leave a mark....
  5. T

    New Kubota..loader edge?

    I used a 2x4 (treated) as an edge on my paved driveway. Drilled some holes and mounted it with some carriage bolts (smooth side down) and vibration nuts. Worked great and kept the drive looking like new. This year I am using a piece of Azek composite decking for the edge which should handle the...
  6. T

    What else do you do with forks besides lift pallets?

    Love a good set of forks; if you have a minor in welding, try fabricating an adapter for your forks to work with your 3PH (SSQA plate), great for moving just about anything that does not require height. I've used that method for large balled trees (burlap and cage) and you can precisely drop...
  7. T

    Ballast New weight box

    I opted for the Kubota factory box as I was able to get with my B2601 in a package deal. Used 1-1/2" and 2" PVC pipes for tool holders and poured concrete around it. Weighs around 600 lbs or so and when not using it resides on a furniture dolly modified with 2x6; rolls around the garage fine and...
  8. T

    B2601 Fuse issue

    Hi All- My B2601 not starting; traced the issue to the 10amp fuse tied to the headlight panel. Tractor starts and runs after disconnection of the multi-lighting switch. After further recon, found that the wire harness connecting to this lighting switch has a yellow wire that is identified as...
Top