I could use some help with advice and info. Here is the story.
I have an opportunity to purchase a Komatsu d20a-5 Dozer for $4500.00. It has 4200 hrs. on it. This machine has been setting for about three years. I also have the opportunity to try it before I buy it.:D I am concerned it will...
I have a Massey Ferguson 40 tractor that is having issues with the power steering. I was using the tractor to feed hay with the FEL and loss steering ability :thumbdown:. The tractor will not turn to the left while the FEL is loaded. I can still use the tractor as long as I don't have a heavy...
Here you go guys, I built my hydraulic auger last year. Here is what I came up with, quite proud of it actually:D.
This is using a 12 inch auger direct drive wheel motor powered from the loader power beyond through single spool valve. I mounted it on one pallet fork with a chain holding it in...
I am building a hydraulic post hole auger for use on my FEL. I will be using the Power Beyond on my FEL to power the auger motor. My control valve spool has 3/4" npt outlet port. I plan to use this same valve with some QDs to power other attachments such as a grapple (one attachment at a time of...
I learned from another forum about my need for a new loader control valve in the near future for my tractor.
I would like to be able to use the front loader with a hydraulic post auger in order to put down pressure on the auger with the loader. I was thinking I could use the Power Beyond...
Ok, so maybe my thinking was wrong on the internal plug being present, it wasn't :shocked:
I remove the side plug and there was no internal plug inside like I thought there would be. That means my boom lift arm issue is not caused by the internal plug being present while the PB was plugged...
I have a Massey Ferguson 40 with an MF 34 Loader. Can someone tell me which plug (by the number on the picture) I would use to install a test gauge to measure the pressure on this valve (see attached picture)? This is the loader valve from a Massey Ferguson MF34 loader. I need to determine what...
I need some info on how to attach to the Power Beyond port of my loader. I have a Massey Ferguson 40 with a Model 34 loader. I also have Big Deans CD that I purchased from him when I bough the tractor. I have several projects/attachments that I would like to run from the Power Beyond.
I have...