thclimer's latest activity
-
thclimer reacted to WinterDeere's post in the thread Saws, supplies for firewood cutt'n.... with
Good Post.
Yes, bigger pump, but then also bigger engine required to drive it, since same pressure at higher flow = more horsepower demand. Also... -
thclimer reacted to yomax4's post in the thread Saws, supplies for firewood cutt'n.... with Good Post.
I have the 044, 361,036 pro and 026 pro. All muff mod saws. I'll be selling all of them and buying a small new something or other...
-
thclimer replied to the thread I just bought an Echo 2511t clone for $99. What was I thinking?.Did you know you can use the handle on the pull cord to aid with leverage to help loosen the caps:
-
-
thclimer reacted to airbiscuit's post in the thread I just bought an Echo 2511t clone for $99. What was I thinking? with Good Post.
Sounds like every chainsaw I own 🥴
-
the good news is the chicken was not rubbery. but what a low end lunch, oval chicken part felt mechanically pulverized and was soft as...
-
thclimer reacted to ranger13256's post in the thread 2005 TC 29 DA Ignition Switch replacement with Good Post.
I just successfully installed the NAPA KS 6600 switch in my 2005 NH TC29DA. As suggested, I connected both red wires (B&D) to BAT, one...
-
good morning all should be a lovely sunny day with a high in low 80s. showered, shaved, put my nice clothes on and ready for the day...
-
thclimer replied to the thread 2005 TC 29 DA Ignition Switch replacement.I was able to use that NAPA switch on my TC33D many years ago, see post #4 TC33D Glow Plug Problem Fixed
-
thclimer reacted to Sawyer Rob's post in the thread Tractors and wood! Show your pics with Good Post.
We were back on the firewood cutting job today, we cut two piles of logs up yesterday and another one today, I also moved/piled...
-
thclimer reacted to Fuddyduddy1952's post in the thread Tractors and wood! Show your pics with Good Post.
While I was at it I cut this big limb also. It was always in the was limbs touching the ground almost, trying to mow the lawn.
-
Well late evening everyone; Spent quite a bit of time out at the fair today, went through all the cow barns and the 4H and FFA...
-
thclimer reacted to airbiscuit's post in the thread I just bought an Echo 2511t clone for $99. What was I thinking? with Good Post.
I was out with mine again today helping a friend cut up a good sized oak tree. He was using his Stihl MS361 on the bottom half of the...
-
thclimer replied to the thread Good morning!!!!.That's a lot on your plate. Hope it all goes well for you.
-
I've been thinking about my memorial talk tomorrow morning about my MIL. Her son said he cannot speak, too emotional. So I'm the leadoff...
-
thclimer reacted to Kenss's post in the thread Massey Ferguson 1740M Hydro: LOSS OF POWER when hot! with Good Post.
Dealer called and after running the tractor on the Dyno it replicated my issue. They are going to install new injectors. A known issue...
