Recent content by Tejas

Need some help!! I have a post driver/post pounder, it is on a SS Q/A mount and currently is connected to my Skid steer. It runs a single acting cylinder...lifts up the weight, and move the lever the other way and it drops it. This valve is leaking, slowly. It appears to be leaking out the...

Ok, here is a pic of the alternator. I am assuming it is missing a ground? What size cable does it need to be? There is a plug on the top of the alternator that is broken. Only one wire goes into it, in the 1 R terminal. The 2 F terminal is empty...should something be there? The positive...

Hello folks, My neighbor has a John Deere tractor 2010 ( I think he said it is a 1963) and I am trying to help him work out several issues he is having with it. Alternator isn't charging battery. He installed a new alternator and it has a new battery. I was hoping somebody might have a...

So, I am building a skid-steer mounted rotary cutter for a neighbors Bobcat 763...Appears to have 15gpm / 3000 PSI. I have done all the calculations, with the help of some of you (thank you)...my plans were to use the 6.15CU 6 spline/PTO hydraulic motor from Surplus Center...they are out till...

Well, I tried to turn the photo on my computer then attach it...still coming up sideways. Sorry, not sure how to fix.

<my 72" Bradco I customized. Thanks folks for the info. I have been able to work out some calculations. This for the neighbors 60" brush cutter...for his Bobcat 663 with 15gpm. In light of these calculations, I am going research direct drive units a bit and compare costs. Motor Torque...

Folks, I need help understanding and calculating blade tip speeds for rotary cutters/shredders. I assume there my be an actual formula of sorts floating around?? I have converted a Bradco SSL 72" cutter that originally had a hi-flow hydraulic motor attached to a RC-71 gearbox. Some of you...

Reaching out to see if any of you happen to have any experience with this tooth design from a company called Jeffery Machine? I have been unsatisfied with normal bullet rock augers, so I知 giving this a try. I read the reviews on THEIR site, of course they are wonderful. I just received one...

I did this last year, but figure a few of you may like the concept. Started with a used, albeit very very little, 24 backhoe bucket, bought at an auction for $85.

My quest for answers has led me here...I am a new member, any direction would be GREAT ;) I bought a Bradco BC72 rotary cutter (72 shredder) for a skid steer. Got it used at an auction, missing the hydraulic motor. So, this is where things get fun...It was originally built as high-flow unit...