Recent content by str8six

You will never regret buying a good cutter. I have a family member with the County Line 6' with the shear bolt shaft and it does alright. He seems to go through shear bolts quite regular and he only mows grass. He installed a grade 5 bolt and ended up twisting a yoke pretty bad on it. I have a...

Eraser Max will kill kudzu. It will kill anything it touches just about at the root for at least 6 months.

How many hours do you have on this tractor? I agree the clutches on these tractors are weird. In the lower gears you can't creep the tractor. The clutch acts more like an on/off switch. In anything above 3rd low I can distinctively feel two different stages of engagement. I haven't gone through...

I have the 4710 and pull my 12' and 15' cutter with it. With both cutters you will start getting poor cut quality long before you will ever start boggin the engine down. I cut every kind of grass you can imagine and even in the thickest bermuda you just hear the turbo spin up and it pulls...

Those fender controls are a little quirky until you get them really figured out. The park brake has to be set. That is the biggest issue I see with it. Then you have to push up, then down or vice versa and it will activate the system. They are progressive as well, the longer you hold the button...

You should be able to turn the draft control knob all the way down and then just use the slide for position control. You may want to try swapping out the top link pin at the tractor with a normal pin, 1" I do believe, and see if the problem goes away. The Bosch three point controls those...

If it weren't for the warranty aspect of it I would already have it fixed. The manufacture won't approve any repair, only replacement. I have welded plenty of new fittings in hydraulic cylinders and will most likely do this one if they can't give me anything more by the end of this month. I even...

Got my new tractor the last week of September. I moved it about 100 feet and removed the front end loader and hooked the bat wing to it an put about 40 hours on it mowing and grading driveways and on November 6th I hooked the front end loader back up and found one of the cylinders had a major...

Agco part number AL5215208 https://parts.agcocorp.com/en_US/c/Level-Indicator-Holder-Kit/p/AL5215208

Is there any truth to this rumor? Does anyone know anything?

I love the specs on the tractor and everyone seems to think highly of them but what's up with the rear ag tire size? I know it's typical of the equipment you see over seas but do any dealers offer to mount a little bit bigger tire? I know the little skinnys will work just fine but I think I...