Shawn T. W.'s latest activity

So this discussion has been constructive, but let’s remember that frames, springs, axles are mostly all made of steel. So while it’s...

I occasionally make up hoses for various purposes, and although I rarely have a problem with them, some of the ones using braided...

Kinda makes sense ... Since there name is based off the tiny SCUT "BX" ... But, they to go up to "L" size ... Not counting there Piranha...

I got mine from BXPANDED ... The "Quick-On" makes swapping things a breeze ... Slide red pin in notch, pivot purple up and slide in pin...

The Banjo Fittings can be crimped onto a hose. I have fitting sets for 1/4" and 3/8" for 100R2 hose that came with the bolt and washers...

Not sure where your fluid went, or even how much it holds ... Guessing if the clutch was slipping you would know what that would smell...

Time will tell ... But I figure on it being cold, and probably snowy ... It's winter.

That depends on how close you are to people. Never seen the US forest service concerned about widow makers in national forests. Neither...

Never seize ... Pull it back, add a little ... A little goes a long way!

My favorite brand of seat.

I have two ponds. The big one isn't fenced in yet. The small pond is 3/4 of an acre. Before getting goats, I had blackberries taking...

We had two fenced water retention areas at my plant about 2 acres each. We put 2 goats in each area and it took them only about two...

Why can't a banjo fitting be crimped onto a hose? I'm fairly sure that one of my BH hoses has a banjo fitting on the end of it ... Or...

Well, it's back together. Shop made a pretty radiator out of mine! Stat opens fine, 20 + temperature drop across radiator. Cannot really...

I used to have a tractor backhoe and did a lot of work with it. It was a heck of a lot better than a shovel and it was a lot more...