Shawn T. W.'s latest activity

Now if they could only dye it red, white and blue!

I call mine a "floppy link" it came on my Bush Hog rotary cutter ... It gives it quite a bit of "float" with that slot ... And can...

To be certain, lift it with the 3pt. With the tractor off and pto not locked in or anything. Try and spin it, look to see if its...

I don't drink tea, but my pants are getting thin ... What stage for clothing? :cool: All kidding aside ... Once they start to grow...

The California backyard trees produce a lot. I have one in Olympia and maybe 2 or 3 about the size of an egg for the season.

These die back every winter but they grow back fast. They need more sunlight in their location. I have cut the tip on the stems with...

4000 hours is a fair amount of hours for the average owner here on TBN. My 10 year old L4060 only has around 1200 hours, but the plan is...

Good post. I don't know much about hydraulics and pressure but I am learning as I go. I was hoping this was going to be my issue after...

If you are looking on a phone then rotate it sideways and then signatures will show

Thanks for the "trick"! I knew I must be doing something wrong 😞

I just want a slot, so I can put metal edging in. I have done similar with a spade for 1/2" irrigation piping. I just don't want to do...

Sure ... But when his transmission gives up the ghost, will it be blamed on "old age" or cheap fluid? Probably could just fill it with...

Thanks to all that suggested and recommended. I ended up using "Simple Green", and throw away paint brushes from the dollar store, with...

I'm also over at OTT which uses the same forum software as here, and they have a listing of equipment right under your user name ... In...

I see your sig just fine but I don't even own a phone, just an old desktop