Recent content by shadman

Last weekend was the first real snow to blow in Muskoka. I noticed a few drops of oil on the inside of the rim of the left rear. It was -20c when I used the tractor, however I did give it 20 minutes to warm up. What am I possibly looking at here? I felt up to see where the source was and it...

Hello all. Its time to consider changing the Tranny/Hydro fluid on my L3400. I have read on TBN about the reduction of the HST whine by using the SUDT2 fluid. I was into the dealer in Stouffville and they carry "premium UDT" fluid from Kubota. Is that the same as SUDT2?

Despite having the proper Sheer pins in the blower and the PTO shaft I managed to break the gearbox and broke the shaft in the gear box of the blower. A have all the bolts and reel drive shaft loose and ready to come apart but the fan will not release from it's drive shaft to allow me to remove...

I put the boat in the water for the first time with my L3400 using the FEL with a ball attached to the top edge of the bucket. The area is fairly shallow and I had the water up to the bottom of the front axle. What would happen if I put the axle in the water. I think I will try to fabricate an...

Hello. This is my first post here on TBN. Great site. I have been lerking for a month or two. I recently purchased my first tractor; 2007 Kubota L3400 with a loader and BH75 BH. Just started to get some time running it and I am very pleased. I wanted to ask members for any tips on getting a...