Recent content by sghpi1

When replacing my backhoe control valve I noticed the port that lowers the boom and the two swing port fitting have orifices built into the male fittings, the local hose makers looked at me like I was crazy, anyone know of a source that sells these? thanks

Can anyone tell from this image what size pump this is? thank you

I have 1999 earth Force EF-2, with a 28hp motor and a 6-8 gpm pump there is internal blow by in the backhoe control valve, notably loss of power in the boom cylinder and the backhoe falls to the ground pretty quick, the boom cylinder has been repacked. No one will rebuild and guarantee the valve...

After re-sealing boom cylinder I have same problem of leak down. there is no check valve on the cylinder, only the two lines. The picture shows what I believe to be a plug on the high pressure side above the boom spool and a check valve above the swing spool. Does this sound correct and could...

using the picture, If I hear you correctly then the outlet port next to A2 can still be used as an outlet port?

i installed a power beyond kit to power my backhoe and outriggers on a 1999 Earthforce tractor. it appears that screwing in the power beyond port kit blocks the tank port. this is on a brand hydraulics LV22RFSTKA2B. If so where would tank port go? thanks