Seven Gables's latest activity

Is the valve accessible? If yes can you install a gauge in the pilot line on the valve section in question or swap pilot lines from a...

I have a 2019 F-250 XLT CC 4x4 with the 6.7L diesel. It's at 105,000 miles now. It's had a rash of issues such as the common upper oil...

I'm a long ways away from making a similar decision. I need a bigger truck, but it's not something that I'll use every day, and it...

A friend sent me this thread and I can directly comment on the homeowner and excavator topic. I rented E35’s for several years (took a...

We usually use a crane to set trusses but we couldn’t get one today. This worked pretty good.

Tested my new to me dump trailer today. Put a good load of dirt on it and dumped with no issues. Just needed some more air in the tires...

Used to be a person could drop a tranny or pull an engine with minimal tooling. Now to pull an engine most of the brands require pulling...

Thanks for the followup!!! We normally don't know how things usually end!!!

Hey guys, just wanted to give you all in update..... I was stumped on this one and spent hours running down the issue. I even spent...

Old and slow is correct, those outer cylinders that pivot the wing carrier tires need to retract as there what controls the wing cut...

It looks like the wing wheel lift cylinders are still extended while center section are fully retracted if plumbed correctly all of the...

$232.00.!! I like the $5.00 push button idea., or the $17.00 key switch..

Is yours the type that Kubota has were the power is applied to shutdown the engine? My old F2000 is of that type. It has a controller...

Here's something fun. I make my own pizza, because pizza is THE best food, but since my son was born a while back, I have only made two...

I like mine with a thick crust so when I get the dough in the pan I partially prebake it before dressing it. I like a mix of cheese...