Sawyer Rob's latest activity

HST trannies are not my favorite for much of anything. I've used and ran large old Hydro's IH656,1026, hydro100 when they were new...

I work and maintain a couple of orchards, so working in tight places with loads and loads of direction changes is what I do the most. I...

Yeaaa, you never know when you are going to want to pull a load of logs home! SR

A possible problem with HST on hills is controlling load or stopping going down hill. With HST you are decreasing the pump displacement...

To answer your question, no. Don't really have to. I've seen plenty of what those can do, or really can't. Hardly any dealers stock...

The 5520R you're looking at provides just that. H pattern synchronized gears on the main 1st to 4th gears, and H pattern for the range...

Only if it has a "creeper" range in addition to the normal Hi Med Lo.

Nope you still have the power loss as the hydrostatic pump and motor is still spinning.

Your rotary cutters do a great job Mr. Sawyer Rob. That's a good looking field!

It was a really nice day here today, and I put my nephew to work, we spend the day at the treefarm, We cut lots and lots of grass...

The only downside I've seen to my 72" tiller is that it pulverizes the soil to the point that after a decent rain, those tiny particles...

All depends on how yours comes apart, some are welded and some aren't. SR

Do you need the complete shaft? If the ends are intact you can buy just the shaft material (inner and outer), assemble into the ends...

Do you need the complete shaft? If the ends are intact you can buy just the shaft material (inner and outer), assemble into the ends...

Here's the main reasons I didn't buy a hystat last time around. 1. My gear drive cost me a LOT less than the same model with the...