Rustyiron's latest activity
-
Rustyiron reacted to Bentrim's post in the thread Help with identifying yellow Post hole digger with
Good Post.
https://parts.danuser.com/site/pagece5.wplus?ID_COUNT=ce_5_home&LN=2&CEPV=Danuser001&CELN=2&CEME=2&NDS=CE_1963&PRF=2&PRNDS=CE_19&PRC=|R|C... -
Rustyiron reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
Today was a whopper in terms of Field Mowing acreage & time. This is a messy one-time/year cut, but this year their Bradford Pear really...
-
Rustyiron replied to the thread The Life of a Custom Mowing contractor.That'll suck up some HP!
-
Rustyiron reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
In the “break” between 1st & 2nd cutting, we go hammer down on field mowing. Started on a customer that takes 2 days yesterday. This...
-
Rustyiron reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
Back to some field mowing. Here I am at the Customer that I cut monthly. We have so many foxes. They are like deer here. All...
-
Rustyiron reacted to sixdogs's post in the thread The Life of a Custom Mowing contractor with Good Post.
Of the captivating smells in life, fresh quality hay is right up there. After baling many tens of thousands of small bales of straight...
-
Rustyiron reacted to civilian's post in the thread The Life of a Custom Mowing contractor with Good Post.
And I thought this was the hammer used to drive the aforementioned pin out of a hard spot! Jon
-
Rustyiron reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
Back at it today after taking Sunday off. After Church we had fellowship and food and I dang near collapsed walking out with my wife. I...
-
Rustyiron reacted to pmsmechanic's post in the thread The Life of a Custom Mowing contractor with Good Post.
I've found that keeping parts around tends to reduce the need for them. But that bill hook isn't cheep....
-
Rustyiron reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
It was at first, then the repair developed “scope creep”. Turns out I broke a billhook. Now it gets a lot more complicated. Here I am...
-
Rustyiron reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
Over to another field I cut on Sunday afternoon for a little teddering. Hoping to bale it tomorrow. I broke a twine guide on the...
-
Rustyiron reacted to mrmikey's post in the thread The Life of a Custom Mowing contractor with Good Post.
I wish I could send you the weather we're having here in NS. No amount of rain for the past three weeks or so. Yesterdays temperature...
-
Rustyiron reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
Jim, yes it truly makes it frustrating. As you well know, rain right after cutting is not so bad, but once it’s dry, anything other than...
-
Rustyiron replied to the thread For the Canadians here.^^^Wow!
-
Same here in NS. We're in the midst of a drought, voluntary water use restrictions, no woods travel, open fires of any kind. We have...