Rustyiron's latest activity
-
Up here, it’s rust. They don’t call it the “rust belt” for nothin, right? -
Rustyiron reacted to paulsharvey's post in the thread Opinions on older diesel trucks with
Good Post.
Not so much rust, but finding a "cat eye" that hasnt been molested by a 16-20 year old kid named Bryce or Landon, is gonna be hard in... -
I'll agree with the other suggesting a new shaft for the front one. Also your drawbar is set to short, your drawbar hitch pin should be...
-
Although I disapprove of my doggos being anywhere near my machinery, here is the rest of the pack:
-
Rustyiron reacted to MossRoad's post in the thread Anyone knowledgeable in hydraulic motor sizing? with Good Post.
You kinda gotta work backwards. Determine the RPM you want the blade to spin. Then you determine the GPM that you have. And you need...
-
Rustyiron reacted to Lineman North Florida's post in the thread Pictures from a skid steer mowing contractor with Good Post.
Been working on a 59 acre planted pine parcel, lots of downed trees from last year's hurricanes, so that slows me down a little. I had...
-
If you need a new complete shaft, try Maugansville AG in Maryland. Great people and they ship all over the country very quickly.
-
Rustyiron reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
As most of you know, we do all types of large property maintenance. We’ve had weeks of rain, so along with falling behind on hay, we’ve...
-
Rustyiron reacted to dadohead's post in the thread Hybrid Rotary Cutter Proof of Concept with Good Post.
I remember new engineers at Deere commenting "I went through 4 years of engineering school to play with cardboard???" Yup. I used to...
-
Rustyiron reacted to dadohead's post in the thread Hybrid Rotary Cutter Proof of Concept with Good Post.
Great comments! This is what a retired mower guy does.... ;<) Great point! Not easily done with just one tractor. It really cuts...
-
Rustyiron reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
Some bales to gather after yesterday’s furious baling session. I’m getting tired. Could use a few days off. Up to the stacking...
-
Rustyiron reacted to 5030's post in the thread The Life of a Custom Mowing contractor with Good Post.
Neither of my M's came with fender mounted pto linkage but they both have it now care of Kubota parts. Something I feel should be...
-
Rustyiron replied to the thread Hybrid Rotary Cutter Proof of Concept.It sure likes your getting a very good cut for the travel speed and material height. Well done!
-
Rustyiron reacted to dadohead's post in the thread Hybrid Rotary Cutter Proof of Concept with Good Post.
Hi, Background: Here is a project I started about 2 years ago. Since I retired (2016) I've wanted to build a rotary cutter that...
-
Rustyiron replied to the thread Mowing Cutter death trap.In my experience, all square and triangular pto shafts only fit together 1 way. One face of either type has a dimension, divot or bump...