Runner's latest activity

You grew up in Mayberry?

I hauled a little wood up the house today but it’ll be at least a couple of weeks or more before I start a fire. I swept the chimney a...

Road farming. We used to live in rural northern New England and many of the roads were bank-run gravel and not much different than our...

Slight Forward tilt with float engaged I'm thinking. I do think I can't tilt it to much when it's angled though or the full length wont...

In all honesty they should be dried. It was a standing dead cedar, and I'm sure there is still a bunch of moisture in there, however...

You will probably be running a forward tilt to the blade most of the time to keep it from digging in too much, so that should also help...

Thanks, however I tend to over build certain things I never built before, definitely didn't waNt the qa dogs buried under snow lower...

Looking good! Bottom of the QA plate looks like where Curtis mounts their plows, so what you have should work great.

So got a few things done last night. Cut notch in a pipe to weld to cutting edge on plow. Unfortunately last night on my plasma...

So yesterday eve cut plow arms, welded plow to qa plate, put in a few simple gussets using scraps and pieces of cutoffs my welds are...

Recently bought and assembled a cheap Chinese 70" utv plow I'm planning to weld to a blank 1/4" qa front loader plate which I'll use on...

Typical 18 ft(poss 20ft), 12,000-14,000 lb equipment trailer I haul lighter things with. The problem was things that wouldn't start or...

Based on your location, and if the truck is a "southern" truck, there is little concern for rust. I would go with the 2012. Doesn't...

I agree. My 2016 has almost 180,000 miles and she still looks and drives great.

The newer one. It has the aluminum body and will look like new for years to come. It still has 100k miles of life on the mechanicals...