rScotty's latest activity

Does the white smoke smell strongly of diesel fumes? If so, that is not coolant. It could be unburned diesel from too low of engine...

If you look at the parts diagram, there is an end projection just past the 30mm threads that looks like a hydraulic bump stop. I wonder...

Yes, that is the same thing that my Kubota dealer told me. My tractor was also out of warranty - but only by a month or so. They said...

I haven't examined one so couldn't say for sure. The symptom was that the boom cylinder would not retract far enough to engage the boom...

You could always order a new cylinder intact....about $4K. A seal kit is $250. As far as I know there never were any specific boom...

Sounds like a great project. I'm glad now that I connected to the creek ifor our ponds nstead of using a liner. We didn't realize it at...

We have a year round stream. By simply widening the stream in three places it now forms a series of three small intercnnected ponds...

Yes, the center of the 2x10 span still has more strength to resist bowing. You could also adde a rim joist - which some call an...

Just disconnect and reconnect them. Sometimes the poppet valve will get sticky or did not seat. It's a common problem. Easy enough to...

As oldnslo pointed out a few days ago, we still don't know what OP means by "hydraulic problem". It could be anything. But I don't...

What are the hydraulic issues that you are experiencing? A fitting that keeps leaking vs the HST doesn’t operate properly. To me this...

I don't like to run any tractor at the higher RPM that the DPF engines seem to require. My preference is to work at a lower rpm just...

I hear you on that. I'm also not working my tractor for a living. Most of what I do is basic landscaping type work on my own land...

Maybe you found a deal. Sounds good so far. A lot of guys use diesel or a light weight motor oil ....or a mixture of the two.... as a...

I doubt that the pickup stream could lift a piece of metal....but the magnet idea still might be worth a try. I've bought single magnets...