Rotro's latest activity

I'm convinced it is. Trying to simulate a fork lift I take it. The only thing I have outstanding is that there are three wires to each...

That makes sense as to why those switches would be there but like you insinuate, I can and would just increase the throttle for more...

Took the dash off and figured out what's going on. Those two microswitches I saw earlier are only activated at the end of brake peddle...

My thought at the moment is that these switches suppose to be activated when the brakes are fully in, but whoever stuck them in had them...

Yeah that doesn't work for me. I can hold reverse all the way down reving the tractor and once enough brake is released, the tractor...

Grok says the linkage off the pedal that goes to the floorboard activates a "neutral switch" and it's out of adjustment... going to go...

On my 2018 1736, any hill that I brake to stop on, trying to go backwards always results in rolling forward until the brake is fully...

Thank you sir, it all makes sense now.

So the 3 point hitch has it's own return? With the backhoe on, there is no oil to the 3 point? If so, I think I have the flow figured...

But I don't know the answer. The back of my tractor has 3 connections, Pressure, Power Beyond, and Return. The backhoe connects to the...