Our JD 3046R with a cab is almost brand new less than 20 hours run time and it keeps throwing out the same code 157.18 after about an hour after we start mowing with our rotary cutter . This brand new John Deere has been nothing but trouble since we bought it. ( $53,000 worth). First a defective...
These brackets and steering cylinder combo are a very bad design. My cylinder has been flopping around between the two brackets for a while. After about 5 years the cylinder started to leak from the rod/ shaft seal to where I had to replace the seals.( with excellent results) but these...
Well I finally removed the steering hydraulic cylinder from my 2004 GC2300. I disassembled the cylinder and replaced fours seals PN 3710935M1 and one one ring PN 4264755M1. There is one other seal at the center of the piston rod that I didn't replace. It that ones leaks it would not be visible...
Mine leaks a lot intermittently right where the shaft come through the seal. It mostly just a a drip but some times the oil just squirts out in a stream . I think I have a seal that is moving around and twisting at times maybe. I have bought some of the internal o-rings/seals but to rebuild the...