Recent content by Ronbo

My wife was bushhogging the pasture (you gotta love a woman that likes to hog) and my baby died (tractor, not the wife). I am getting fuel up to the pump. I cracked a line at the injector, opened the compression release and cranked her. No fuel to the injector. I did not check the other two...

My bush hog is worn out. the whole deck is rusted through, the sides are hitting the blades and the blades are worn out. I think it would be about as cost effective to purchase a new 5 ft hog as it would be to fix this one. I am south of Houston, tx. Anybody know the current prices and who has...

I was helping a friend move dirt and when we were about done, my shifter suddenly went sloppy. He used his tractor to push me on the trailer and I took it home. Opened up the transmission today, 5 minutes, and found that the shifter had broken just below the ball. Nothing dropped into the...

I have a Nortac 254, 180 hrs. I have no acceleration. I turned it off yesterday, and when I restarted it, I had no acceleration. I drained the tank, cleaned the screen in the tank, cleaned the screen in the hose end. Replaced the fuel filter (filled it with fuel first). I removed the injectors...

I'm thinking of purchasing one of these http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=45381 My power comesi and then I have 100 amp service off of that that goes to my house, My well also has a sub panel off of the main. This requires me to run a generator with amin lines out...

My Nortrac was running about 200 degrees. I decided to see how dirty the radiator was. It looked pretty dirty. I then noticed what looked like a handle at the top in front of the radiator. I pulled up the handle and a screen came up. I washed off the screen and reinserted it in the channels. Now...

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=29519&item=4347920323&rd=1 Ron

Posted in parts and repairs, but got no response. I have a Nortrac (Jimna) 254. It is a good tractor with no real problems, until now. If I put the front end in the pond and place it in 4 wheel drive, the rear wheels spin and the front don't. If I raise the front wheels and try to rotate them, I...

I have a Nortrac (Jimna) 254. It is a good tractor with no real problems, until now. If I put the front end in the pond and place it in 4 wheel drive, the rear wheels spin and the front don't. If I raise the front wheels and try to rotate them, I can't. If I take it out of 4 wheel drive, Ican...

I was driving down by the river in Arkansas, and dee what I found

I purchased a plasma cutter a couple weeks ago, and finally got around to using it.

I have a Nortrac 254 with FEL. I want to add T&T. I am thinking that if the spools are Prince, I can just add a coulpe more to the stack. Does anyone know what brand the spools are? If they are not prince, will prince fit up to them? Just a thought.

Does anyone know which brand of controls are on the FEL for the Nor Trac (Jimna)? I would like to add additonal controls for a toplink and bottom link. Ron