Recent content by roaf3x

My dealer wants 1K for a Wr long valve install plus 300 for delivery/ (9Miles) I have identified the power beyond and dont really see it as difficult ? Has anybody faced this recently ? I am adding a hydraulic angle kit (worksaver) with a crossover valve kit as well. It seems pretty straight...

I pulled off my Kubota issued wheel spacers 1.5" I would like to sell the spacers and stud set. They are in great shape . Pm if interested. Thanks R3

I am trying to verify if there is any difference in the (gear) drivetrain between these two tractors. A friend is going to purchase a set of turfs from my L3200 and the turf specs are different for the L2850 than the 2550. The L3200 has the same rears as the 2550. Thanks if anybody can help. ! R3

Has anybody used the BORA wheel spacers. I can not find any guidance on how to install them. I have not heard of any complaints or issues with them. ? for the group- Will Aluminum spacers with steel bolts hold the weight of a loaded tractor. The L3200 can haul a good load on the 3 point. Has...

Is there anyway to verify rims will bolt on from new to old? I'm selling L3200 turfs and a gentleman wishes to use them on a L2550. I would appreciate any help! R3

I throw this out to the experts here. Why would i have to add a 3rd function valve to run a SSQA plow? On my B there was just separate hoses that hooked into the curl circuit. Is there a reason why on my L3200 I could have hoses made to fun the angle feature on the plow same as the B? Do...

I saw a 6 foot plow on what looks like SSQQ on the B 50 series? Does anybody have a price or knows who makes it? If it really is a true SSQA it will fit my L3200. Thanks, Roaf3

Does anybody know of a source to get the pin type stablizers in place of the turnbuckles for my L3200. Is there any similarity between the Grand L. It is getting to be a PIA to loosen and tighten the turnbuckles. Thoughts or suggestions are appreciated. Thanks! R3

I just ordered a right fender handle for my L3200. It is funny it comes with the holes predrilled and stickers over the fender. The part is "extra' I ordered the part and it came but the handle has the studs with no nut and washer. I am not crazy but for 66.00 should the nut and washers be...

Hello all, After changing the oil in my L3200 I was left with some questions for other operators. 1. The manual calls for 6 US qts. I dumped the oil and put a new filter on. When I checked this am the level was 1/4 inch above the top hole on the dipstick . Is this normal? 2. I also...

Has anybody done an oil change in an L3200? Are there any tricks? Just getting to 50 hours the manual has some weak graphics but seems pretty normal . Thanks ! Roaf3X

My Dad was bush hogging and when he stopped he could hear the fuel pump with the key on and the engine off. He also said it was hot to touch. He has 400 hours on the tractor . Any thoughts on the noise or the heat?? Thanks Roaf3x

Hi All. Does anyone have a picture of the belt routing for a 318 snowblower hookup. Have a plow but picked up a used blower without a manual. Many Thanks! Happy New Year RD

Has anyone bought the 3 point carry all from Northern or TSC. They are not cheap but comprable to my local welders's price. Curious on quality and loadability. They are rated for 2000# but I would never use it for that. Any thoughts? Merry Christmas!!! RD

Greetings All, I need to ask other L3200 L38oo owners is they feel their tractor lugs at low RPM. I sold my 7510 and bought a new L3200. The 3200 seems to lug down at 1500-1900 RPM at full forward pedal. If I let off and milk the pedal it seems like the 7510. 1. What RPM are you using? ( I...