redman135's latest activity

I was told that to reduce bee drift I should paint the boxes in different colors. I would assemble a batch of boxes and that batch would...

OP I strongly recommend you try both tractors for their ergonomics. ie MF rear scv controls are angled back so you can only use 1 at a...

Looked at the photos. Look at the rear tyre RIMS. Construction tyre rims are 1 piece and Ag tyres rims are 2 piece. 2peice rims can be...

thread started in 2021

Get a piece of board 2-3 ft long and use the board to show oil spray. Use a board the length suggested to keep fingers(use gloves to)...

OP ask specifically about the universal joints. In New Zealand, on the early models they were a nortorious weak point.

Rontaki, post 104 re speed bumps. HELL NO!!! I get assaulted 30 - 60 times per day in the name of Saaaaafty??? ! BULLS*IT. The roads...

Your complaint is to vague for us to help. Please state the tasks you are doing, revs running at(what revs are full throttle?), how long...

Check the response control.At max it can prevent the 3ph from lowering when empty. Resonse control is behind your right heel.

Hay makers, if it is to wet to make hay why does noone make wrapped silage? Are there no silage customers? or no wrappers? Where I am...

Re FEL lift capasity. ASK if the lift is measured at the bucket pins(looks good ,but artificial) or at 18' (approx front of bucket and...

When you try the MF for size, put the seat to max height, and test for head clearance. This model had a lowish ceiling due to the roof...

I went through all 5 pages. In the first 2 pages is what you need to do. The water bars on the top section to keep water off the trail...

You have worn internal draft control linkages. Common problem . You will need further advice on how to deal with this. I had the same...

Thank you ultrarunner, I am in new zealand and we don't have a problem with oak pollen. It is mainly grass pollen and privit.