RayIN's latest activity

  • RayIN
    Yep, a "neutral-cure" silicone is best for most applications, vs the cheap stuff.
  • RayIN
    After experimenting, I settled on SAE 30 motor oil in my Hustler ZTR hyd, motors. This is the 4th year on this oil. This winter I'll...
  • RayIN
    RayIN replied to the thread fuel additives.
    The best overall lubricant is biodiesel, which also happens to be the lowest cost.
  • RayIN
    RayIN reacted to dodge man's post in the thread fuel additives with Good Post Good Post.
    This an old study, some makers may or may not made changes. It’s still valid in a lot of ways. For example an old stand by, Marvels...
  • RayIN
    RayIN reacted to rswyan's post in the thread Carpenter bees and cedar with Good Post Good Post.
    House here is cedar sided with some redwood used for decking and trim. Carpenter bees seem to have no issues with burrowing into it to...
  • RayIN
    RayIN replied to the thread Fire extinguisher on tractor.
    That's why before using a handheld dry chemical extinguisher you invert it and knock it on something solid.
  • RayIN
    RayIN replied to the thread fuel additives.
    You'll find this fuel additive test very informative and surprising. A few people will say to pour ATF or motor oil in the fuel tank...
  • RayIN
    RayIN replied to the thread Here's an ouch!!.
    One drive from Ft. Dix to home I unknowingly ran over an 8" screwdriver with a rear tire. I found the screwdriver half-way through the...
  • RayIN
    RayIN replied to the thread Top and Tilt on the left side?.
    Ever try to operate the 3-pt. controls while looking over your left shoulder and step on the clutch and brake at the same time? I looked...
  • RayIN
    RayIN replied to the thread grader blade size?.
    Can you use the 3-pt leveling feature to raise one end of your box-blade? If you can, you can make a pass on each side and it will build...
  • RayIN
    RayIN replied to the thread Shuttle shift issue.
    For those of us who don't know, what is a dk4530?
  • RayIN
    RayIN replied to the thread Rotary Cutter Salvage.
    Once you sign the paper, it's yours and your responsibility. Hard truth to swallow. Did the new rotary mower have a sticker on the...
  • RayIN
    RayIN replied to the thread Shooting back stop?.
    Do you own that woods? If not, how will you control people walking in that woods while you're shooting that direction?
  • RayIN
    RayIN replied to the thread Massy Ferguson 1040 FEL.
    Canaway, the end piece is welded onto the shaft, so lots of work just to be able to replace the gland nut; then we don't know if the...
  • RayIN
    RayIN reacted to 2manyrocks's post in the thread Jury Duty Scam with Good Post Good Post.
    https://www.tned.uscourts.gov/jury-scam-alert The federal court clerk's office handles all jury duty. If you have the scammers contact...
Top