RandyT's latest activity

Here in IL it is 3001-5000 is brakes on one axle. And 5001 and over is all axles. The issue is people will purchase 7x16 tandem axle...

Were supposed to have brakes on all axles above 5000 pounds or 2268 kg. A lot of tandem axle trailers being towed around here with...

I'd start by blowing compressed air through the fuel lines, somewhat gently, to clear any obstructions. I've also seen where the fuel...

And it looks like the spring clip and the valve are NLA from Husqvarna.

To me it looks like the left blade spindle is not setting level with the deck. There is a blade tip misalignment between center and...

Kind of appears like the blades are not level side to side when cutting. Could be the deck but also check your tire pressures. Your...

Everybody likes to scream lemon law but most people don't understand how it works. In IL it is 3 or 4 failure attempts of the same...

The other consideration could be the parts have superceded and they are not backwards compatible.

Since you purchased it used. Is it possible the engine had been previously overhauled using after market parts, and those parts are...

The only way to get away from them is to get them before they get you the second time. Years ago use to do a lot of night fishing...

Probably horse flies. Those things will bite right through your shirt.

761-05007

This is the brade pad I am referring to. The picture is turned 90 degrees so the rivets holes would be installed horizontal. The...

Sticker shock should of went out the window a few years ago. Was just looking at a 42" Cub Cadet this morning with the manual pto...

Not that type of clutch. The clutch used on mower is only a electromagnet hold. No solenoid, no fancy wiring. Just an electric coil...