Recent content by R_Mikell21

I just checked and there is no ‘plug’ inside that port, so I’ll be ordering one right now and hopefully that gets me up and running. Thank you both, very much. Extremely helpful!!!

This line is from the hydraulic pump. The relief valve is directly behind it and the supply port for the SCV is directly below that. That’s why I can’t wrap my head around why there is no pressure to the supply port.

The line the that is clearly shown is the return, the port that has the gauge is the supply and the sump line is below. The relief valve is directly above the port with the gauge connected to it. 3 point will lift a load and PTO will also pull a load. There is no power beyond

First off, thank you for the reply. I know, I’m sorry, I’m trying to explain it to the best of my ability. But I haven’t changed anything, I have added everything. SCV and all the lines are brand new because the tractor didn’t come a loader or SCV or any of the lines. Everything is plumbed...

I have a 2003 JD 790, it didn’t come with a loader. I found a used Westendorf TA-111, bought a new SCV, and all the lines needed. Got the loader mounted, the SCV and all lines installed. I’m not getting any pressure to the SCV. The 3 point and PTO work great. I’m at a loss at this point. Can...