Recent content by Pks

One thing I like to do when I am willing to help somebody is to try and determine if the person would help me if the situation were reversed. The fact that he stiffed you fifty bucks when you did the work for him tells me that he's not interested in helping you if the situation were reversed. So...

Running it through an area that is unknown is a great way to find big rocks that can injure the chaincase and certainly bend the tines.

I have not thought about using boat trailer fenders. That is a good idea but like you said this one more project to do as if I'm not overloaded already

If you go into business and make front fenders, Count Me In I'll be your first customer. I need a set of front fenders for a Kubota L 3700 I am so sick of the mud getting on me and then all over the tractor as well.

I pour my cat's used cat litter into their hole. I've had good success with that.

I cut the original exhaust pipe slightly before it began to bend so that it would be for the most part a straight shot for the new exhaust pipe flexible tubing. I used 2 clamps to ensure that vibration would not rattle the connection loose. I don't know what size pipe it is, you will just have...

What's the cost for a StarLink system installed and monthly?

In my view the issues you are seeing & fixing and experiencing are all because the dealer did not do a proper setup. I've had multiple Kubota tractors and they don't have these issues. Get the dealer to do a full thorough proper fixing.

Here is my solution to moving the outlet of the exhaust. I'll have to take the panel off to show you how I mounted it on the existing exhaust pipe but I can tell you that I cut a length of the original pipe off so that it would give me a nearly straight down exit point from which to tap onto...

The photos are in reverse order unfortunately. However, they show the entire layout of the third function system and the grapple itself. The valve is from WR Long so is the switch and fittings. I think the grapple is also WR Long, it all came as a package.

Here is how my third function valve is mounted to my L 3700. It sits on an L-shaped bracket that has two large bolts that bolt directly to the loader subframe.

How'd you find the Ausie and NZ parts...from your local dealer's parts book. I'd like to do this on my L3700 SU.

Check your hydrostatic filter, they have been known to be plugged with lots of chips on the outside of the filter before the oil goes in that's what the magnetic ring is all about. Also check the oil level in your hydrostatic transmission body. If it's low it might not be picking up any oil.

I would like to change the outlet location for the exhaust pipe away from the front left tire to somewhere where I don't have to breathe the exhaust. I was thinking of running an extension pipe 2 the outlet the back of the roll bar above my head. I don't have a cab. Has anybody done something...

I have an L3700SU with category 1 3pt hitch. I would like to use a category 2 drawbar but the 1.125 pin size won't fit the 1.00 inch swivels in the lift arms. Is there a way to convert things to allow for the category 2 drawbar?