Recent content by Phantese

Thanks for your replies, as I was farting around with it again today I accidently hit the bottom on the fuse box, and it snapped open, from the side (eventually the box opened 3 ways... revealing the screws to take the fuse out, it was hidden and not visible at all pure accident, but thank you all!

I blew a 60A slow blow fuse on my DK4210SE, embarrassingly I cannot pull the fuse out of the fuse box. I tried for almost an hour to pry it out, wiggle it out, pull it out etc. It will wiggle like it's ready to come out but I cannot get it to pull out I eventually pulled the yellow casing out...

Ya yours is a science problem lol, too much glass (too much surface area for a tractor heater to warm all the glass), without AC you can't remove the moisture from your cab so the air gets hot but the cab is filled with moist air (like a car in winter running the air on recirc) like most of us...

This is a good product for Dave, it reduces the ability for condensation to stick to glass. If your getting fogging in all seasons you need to go a bit deeper.

Always wear gloves and eye protection when working around hydraulics, high pressure water/oil any fluid can be dangerous if it pierces your skin, now that I've scared the poop outta ya have fun with the Grapple!

WOW!

Sure! I dug about 1000 feet of 3 to 4 feet deep french drain to remove water from a property I bought. I dug out about 30-40 stumps, replaced 3 or 4 Culverts on driveways for friends, got stuck in mud a few times and had to dig myself out (as long as you have a hoe your never really stuck...

Since I bought my DK 4210SE the windows have fogged up when I switch from AC to heat - almost every time, I just got used to driving with the doors open for 10 minutes till the moisture cleared up. I've had it back to the dealer 3 or 4 times for this, the solution from Kioti head office was to...

Hi, The dealer replaced the subframe and the rear mounting bracket, no repair was done, said it was a common problem so they warrantied it.

My KB2485 backhoe subframe cracked and broke the rear housing for the hoe as well. I had it 20mo's and not sure when it happened but the cracks are catastrophic total failure. My dealer told me it was out of warranty (older than 1 year) but Kioti acknowledges bad welds on their sub frames and...

Hi, My Engine warning light has just started to come on and off while operating, is there a way to read the engine codes on a Kioti DK10 series anyone?

Hi, I'm at home and my DK 4210 tractors owners manual is at my cottage a few hours away, I was looking to view one online, I saw one a few months ago but for the life of me can't find it online now, anyone know where to locate one?

Jim, Here are the dimensions, the plate is a quick attach 1/4" I think, all the steel is roughly 1/4". It was cut out on a CNC Plasma machine and the sections were welded together, the teeth are pointing backwards to cut roots as you stab and pull back on the root. It really works great...

Hi, Does anyone know the relief valve setting for this type of Kioti backhoe? Also if there is a port relief setting? A dealer told me I could max out the relief valve (so it doesn't relieve) and rely on the tractors relief setting which is ~2770 PSI, you can increase the hydraulic pressure...

Hi, Has anyone been able to add the No Stall feature available on the NX to a Dk10SE model, they are customizable but I don't thnk this option is available on the DK10SE series, or if it is, how well it works, or the cost.