Recent content by orville

  1. O

    Replace hydraulic pump on 2005 TC30

    I got it! We took enough extensions to make a 2 foot long one. With the help of a swivel and a 12 mm socket we crawled under the front end. With my grandson holding the light and my head stuck in the crossmember there they were. It took less then 2 minuets to get them out. If New Holland thinks...
  2. O

    Replace hydraulic pump on 2005 TC30

    Thank you Roadworthy. I did try that and it would not get close. The repair book states remove 4 bolts, but do not say what kind of tool to use or how. I guess I am going to have to use magic.
  3. O

    Replace hydraulic pump on 2005 TC30

    I need to replace the hydraulic pump on my 2005 NH TC30. I can't find away to get to the bolts behind the pump. If you have don't it before, an help would be great, or maybe a link. Thanks
  4. O

    Hydraulic quit

    I just got a Mitsubishi BD2 dozer running again and was running great, then the 6 way blade started moving sluggish and then quit. Filter is new and hydraulic fluid is full and a little milky. If I let it set for 15 min it will move slow and then stop again. CausticUrbanCoast has been a life...
  5. O

    Air in fuel lines

    I have a Mitsubishi BD2 bulldozer that has been running great for years. Yesterday I went out to start it and I had air in the fuel lines. I primed it and it would start but not rev. Air keep getting back in the lines. I am thinking it is a worn priming pump. Any input from anyone would be...
  6. O

    TC 30 FWD Bearing

    I had the tapered roller bearings (part #SBA042532205) lock up on my 2005 New Holland TC 30 FWD front axle. I went online and found the bearings. The cost was over $100 each with shipping. Is there a replacement bearing that will fit that does not require the need to get a loan. LOL :laughing...
  7. O

    bulldozer track

    I just got a Mitsubishi BD2 GII and I need to know something about the tracks. The left track work great, but when I pull on the right track it tries to kill the engine. I have to pull and let go real fast to keep it running. Does anyone know a good fix.
  8. O

    Backhoe  LW-6

    I have a LW-6 that I got new back in 2008. One of my boom cylinders has blown the piston seals. The book shows the cylinder part number as LW-6.03.011. Does anyone know where I can find the seals online? Everywhere I look they want to sale the whole backhoe.
Top