OldTrix's latest activity

I'll play with that later today- I've switched to the grapple for rock collecting, but can at least give it the feel test for temp...

No real changes. If it's really cold, like in winter, the pump will be a bit whiney at first, but nothing too unusual. Nothing...

I will add, there does seem to be something off with the loader joystick. The uncurl function isn't as linear as the others. It seems to...

I have a Mahindra 2665 that I bought with about 250 hrs on it. I notice that when cold, just after starting, the bucket curl is firm...

You might have to enter a zip code and pick a dealer before you can do the model search. Find the part, copy the part number and do a...

Or this one?

This hose?

Find some waterproof grease and cover them generously. That should help prevent more rust buildup. I wouldn't worry about them getting...

Yeah, I figured that as well. Weld and rebore?

I discovered some of the slop in my FEL today, seems the pins have a bow to them. The PO of this thing must have been a real genius...

I've got a 2665 with just under 300 hrs on it. The shuttle shift is extremely clunky- you have to fight it to engage, sometime it misses...

Success. The McMaster Balls were a little more egg-shaped, but they clipped on the Mahindra balls just fine. A little bending to line...

Here's what I ordered, along with a 455mm rod. I can uncouple and attach the shank at the lever end to hook on the ball and do the same...

pics. Lower remote is hooked up. new remote lever just to the right Here's the goober setup from the factory. Ball shank from new valve...

OK, I managed to locate my taps/dies kit and thread tools (moving is such fun). Stud ball thread is M8 x 1.25 ball head is .390"...