oldnslo's latest activity

My wife and I will frequently split a meal if at a restaurant and bring leftovers home for another meal or two. I have never liked...

There might or should be adjustment on when the throttle engages the choke. You want engine at full RPM before choke is engaged. Some...

What you are calling a habit, some of us call a lifestyle. Everything is paid off and can buy what we want. But by todays standards we...

If my hands are greasy I just pick up a handful of dry dirt and scrub them like washing my hands. The dirt absorbs the grease and the...

Your 445 should handle that but like big tiller states you may need some front weights when that bagger is full of wet grass or support...

Suction side with hose clamps is where air can be drawn in. Check to see if the hose has hardened or cracked with age. Also check to see...

The tank line is not gravity feed. In designing the filter and cooler circuit you want components that will handle the maximum return...

Triple check all of connections on the inlet line to the pump to confirm they are tight and not leaking any air when under vacuum. If...

Thanks for the ideas. I do have a piston ring compressor but it's too big. I ended up cutting some thin shim stock and using it like an...

Item 8 is required for the motor to operate correctly. It appears to be the seals for the pressure side load feature on the motor. High...

I would confirm that your loader valve has regen feature before changing anything. First would try pushing joystick farther to right...

Do you have a diagram or schematic for diverter valve? If nothing else maybe a couple pictures of the valve would help.

Rock shaft is a complete separate system from the HST. Charge pressure is usually low in the 100 - 350 PSI depending on transmission...

On opposite end of rod circled in blue it looks like could be a cotter pin missing. Not sure what that linkage connects to though...

Is it slow going both forward and reverse? Any noticeable new sounds or change in sound from cold to hot? Not sure but first thing to...