number two's latest activity

  • N
    number two reacted to blizzardslayer's post in the thread Front mount or loader mount blower? with Good Post Good Post.
    I’ve run a rear mount for 20 years. Would never give up my loader. At minimum, I clear about 2 miles with multiple passes after a storm...
  • N
    number two reacted to Lastkidpicked's post in the thread your method of selling with Good Post Good Post.
    This could be good for both sides: @big bubba gets to sell his tractor without the hassle The dealer gets an in-demand tractor on...
  • N
    number two reacted to bgr's post in the thread your method of selling with Good Post Good Post.
    You do have a valuable tractor. The mid size Kubota 4 WD models are in high demand. I traded in a 10 year old L2550 a few years ago...
  • N
    number two reacted to bdhsfz6's post in the thread your method of selling with Good Post Good Post.
    When my FIL's farm was liquidated, we hired an auctioneer to sell a lot of equipment. I sold what was left over on FB marketplace. Two...
  • N
    number two reacted to Alan46's post in the thread your method of selling with Good Post Good Post.
    What a shame things have come to this!!!!! Thanks for your post!!!
  • N
    number two reacted to ZiggyD's post in the thread your method of selling with Good Post Good Post.
    There are two advantages to selling through the dealer which will make the 10% inconsequential. First, dealing with tire kickers is a...
  • N
    number two reacted to m5040's post in the thread your method of selling with Good Post Good Post.
    Raise the price 10% and let dealer sell it.
  • N
    number two reacted to Shenandoah MF1760's post in the thread your method of selling with Good Post Good Post.
    I'd forgo the Facebook Marketplace route as that can be a nothing more than advertising for thieves, especially if you're in an low...
  • N
    number two reacted to RayIN's post in the thread Pto extender with Good Post Good Post.
    That locking pin is fully extended, meaning it locked the extension onto the PTO shaft. Will the locking pin push in all the way? If so...
  • N
    number two reacted to repete's post in the thread Pto extender with Good Post Good Post.
    Get one of these. Just used mine (different brand) for removing an inner race off a wheel hub I could not get a puller behind. Heated it...
  • N
    number two reacted to scootr's post in the thread Pto extender with Good Post Good Post.
    Sometimes only a slide hammer will do. Looks like a hole where you could put a hardened bolt thru the end and and tap with a hammer
  • N
    number two reacted to CH4Ohio's post in the thread Pto extender with Good Post Good Post.
    Put a bolt or screwdriver etc through the hole in the end of the extender and attach a ratchet strap to it. Get the other end secured to...
  • N
    number two reacted to zzvyb6's post in the thread Pto extender with Good Post Good Post.
    Carefully hose clamp the pin in as far as you can. Tap it to ensure it's pushed in ALL the way. Then give it gentle nudges with a...
  • N
    number two reacted to tacticalturnip's post in the thread Tractorbynet with Good Post Good Post.
    @Muhammad make sure you come in here and absorb some of these good words. Let that massage your ego a little, you gave us this site...
  • N
    number two reacted to 1930's post in the thread Tractorbynet with Good Post Good Post.
    I don’t post here very often anymore because I have more going on than I can keep up with but I wanted to say thank you to all of its...
Show older items

Footer Links 1

Top