number two's latest activity
-
NI have a battery cut off switch. it's not easy to see unless you open the hood and if your looking for it you can see where the battery...
-
Nnumber two reacted to Eagle1's post in the thread Converting single HST pedal to two pedal setup with
Good Post.
I have both types, like the treadle for loader work and really when steep nose down to control movement. as in cleaning ditches... -
Nnumber two reacted to bdhsfz6's post in the thread Converting single HST pedal to two pedal setup with Good Post.
This onesey, twosey pedal thing has been discussed here many times. It really comes down to personal preference and how you use your...
-
Nnumber two reacted to Kubota 2007's post in the thread Kubota L series with a LA1065 Loader with Good Post.
As of today I have a new loader on my L4740. LA1065 fit on the tractor without modifying anything. I’ll be glad to get my tractor back...
-
NLooks like a topic to explore https://www.tractorbynet.com/forums/threads/b2320-front-snowblower-advice-needed.326174/
-
NI have a BX version (actually two of them) The BX is "lighter duty" than the B2781A. I have used a BX for the past five years mounted...
-
NI believe your tractor has a intake air heater system Hopefully this will help Key Switch: A-Start Position - Turn the key to the start...
-
Nnumber two reacted to Gordon Gould's post in the thread Kubota L4610 ignition switch with Good Post.
The fuel solenoid is normally open allowing fuel flow. The way the shut down works is when you turn off the key a timer relay starts...
-
NHere is the diagram for the start/stop, switch and fuel solenoid. Go here, you can down load the service maual for free...
-
NJwaldo1973, Welcome to TBN Can you tell use what you did with the wires and why? What year of manufacture is your tractor? And which...
-
Nnumber two reacted to Captain Dirty's post in the thread Spray On / Rinse Off cleaner and degreaser. with Good Post.
It has been my experience after decades of washing cars, house siding, motors, and other objects that a water rinse, even from a 1500...
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
Today was a dreary day. Of course unfit for baling. But dampness is great for mowing hay. Keeps dust and chaff out of the engine...
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
Some baling scenes from yesterday. East Penn railroad tracks to the right. Notice the hay is unraked to the far left? We had possibility...
-
Nnumber two replied to the thread Broke my B26TLB rear axle shaft.Any news on your tractor repair? Good Luck!
-
NCheck out their taxes there! Especially the "fart" tax they have to pay for each cow!! Last I heard small SLH tractors were being...