number two's latest activity
-
Nnumber two reacted to daugen's post in the thread Your last generator Maintenance Run with
Good Post.
117 volts as PECO tries to keep up on a very hot and humid day here one of the high end stereo gurus says to get really good sound you... -
Nnumber two reacted to thepumpguysc's post in the thread Kubota V1702 engine - Is 200-250 PSI too low compression to run? with Good Post.
I’ve seen small diesels run at 290 psi but not lower.. & they needed really long crank times. To check the fuel system.. a quick and...
-
Nnumber two replied to the thread L5740 or some tractor.Do you like it? Still a bunch of loot. Good Luck!
-
NThis is supposed to work with fluid filled tires. HYDRO 1500 ™ 5 Gallon | MULTI SEAL
-
Nnumber two reacted to Complete Turf Care's post in the thread Pictures from an athletic field contractor with Good Post.
Verticutting the last of 5 golf courses today for BREC (Baton Rouge Recreation). Things don't always go the way you want. We created...
-
Nnumber two reacted to dkmc's post in the thread Regret not getting a backhoe for my tractor with Good Post.
We're just on the start of the micro-miniEx population boom. Already near new ones are for sale all over. A few years from now, used...
-
Nnumber two reacted to deezler's post in the thread Regret not getting a backhoe for my tractor with Good Post.
Thats what I used to do, before I got comfortable taking the whole tree. It's still way, way more difficult without the majority of the...
-
Nnumber two reacted to dnw64's post in the thread Where to go for rear tire replacement??? with Good Post.
Pete's is the best. I wanted to get my rears filled with Rim Guard/Beet Juice. They came to my place and found they were already...
-
Nnumber two reacted to Renze's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
With heavy equipment, you need to add grease untill the old comes out. Thats the only way you expell foreign particles as well as wear...
-
NI finally found my hose leak by power washing the area, quickly drying it with rags, and then following the occasional drip up to the...
-
Nnumber two reacted to dodge man's post in the thread 2014 BX1870 Steering Frame Broke with Good Post.
Yep that looks perfect when you have almost every tool out of the tool box, that means it has to be time for reassembly. :D
-
Nnumber two reacted to JimBinMI's post in the thread 2014 BX1870 Steering Frame Broke with Good Post.
Finally getting to the point where it's going back together. Had to remove the radiator to get to the lowest nuts on the backside by the...
-
NI’m not sure based on your desciption, but is this what you are looking for?
-
NFollow up on my oil dilemma. At the time of the spill I discovered that I didn’t have any oil dry in stock. I was not able to get any...
-
Nnumber two reacted to deezler's post in the thread Regret not getting a backhoe for my tractor with Good Post.
Yes. But taking down the whole tree using a backhoe or excavator is by far the easiest way to get the stump out! The whole weight of...