number two's latest activity

Since went through an auction I doubt you have a leg to stand on. If was purchased directly from Kubota dealer with no auction involved...

My 2 cents, a flat bottom L grapple 65-70" wide. Fan of non tied tines, easier to penetrate a slash pile or do construction clean up...

I purchased a 72" Bradco root rake in 2016 for $4,600 for the M59 TLB which has a 75" track width because I want the grapple to pick up...

I have the Homestead Implements Pinnacle series root grapple with clam shell. It's a beast of a grapple that I use mostly for logging...

front seal leak? after engine clean, run until you notice leaking, maybe use talcum powder to identify source. best of luck...

gengine is probably onto something for the source of your leak. Experience is worth a lot! I would remove as much obstructive sheet...

Pressure wash your engine, specifically the front, trying to get every nook and cranny without bending the fins on your radiator, and...

The two bolts were used to fasten my puller to the stump jumper. Then my puller pushed against the center of the gearbox shaft.

Many years ago we got our grease in the 4? gallon/40# keg, under the cover it had a follower plate with a hole in the center. You would...

Been true here out west for a good 10 years now. Used to be, if a wildland fire got started the nearby ranchers and farmers would...

I agree. We once had a booming forestry industry and I worked in it, but that ended pretty much mid 2000's around here. All the mills...

Part of the problem with the fires is that certain areas do not subscribe to the proper management of the forests. Those huge fires...

On my most used compressed air hose, I find that I need to replace the female coupler every few years as the o-ring distorts and doesn't...

That's what I did when I had my 97'. That and a Fumoto drain valve.

Caver - I had a 2019 ram truck - filter removal was difficult and always a mess. I read here someone recommended using a ziplock bag...