number two's latest activity

gengine is probably onto something for the source of your leak. Experience is worth a lot! I would remove as much obstructive sheet...

Pressure wash your engine, specifically the front, trying to get every nook and cranny without bending the fins on your radiator, and...

The two bolts were used to fasten my puller to the stump jumper. Then my puller pushed against the center of the gearbox shaft.

Many years ago we got our grease in the 4? gallon/40# keg, under the cover it had a follower plate with a hole in the center. You would...

Been true here out west for a good 10 years now. Used to be, if a wildland fire got started the nearby ranchers and farmers would...

I agree. We once had a booming forestry industry and I worked in it, but that ended pretty much mid 2000's around here. All the mills...

Part of the problem with the fires is that certain areas do not subscribe to the proper management of the forests. Those huge fires...

On my most used compressed air hose, I find that I need to replace the female coupler every few years as the o-ring distorts and doesn't...

That's what I did when I had my 97'. That and a Fumoto drain valve.

Caver - I had a 2019 ram truck - filter removal was difficult and always a mess. I read here someone recommended using a ziplock bag...

I epoxy coated the floor of my 24 x 32 work shop, mostly used for wood working. I did find out that Titebond wood glue has a stronger...

Same. I've always done my own, on every vehicle I've ever owned. I don't care so much about the cost, but I like to know it's done...

It can always be worse. You could have not noticed and then accidentally poured a gritty substance in your engine, dropped a lit doobie...

I can not be much help with your "What should I try next", But I have the three spindle assemblies from an unidentified Kubots mowing...

We have set up a few owl boxes and the owls like them…