number two's latest activity
-
Nnumber two reacted to deserteagle71's post in the thread The Life of a Custom Mowing contractor with
Good Post.
Hay Dude, every time I see the pics you post I'm reminded of how incredibly lush and green Pennsylvania is, compared to Nevada where the... -
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
Back at it with Field Mowing today. Looks like some 5’ tall Johnson Grass. It’ll be 10’ tall in another month. It’s 98 degrees and...
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
In the “break” between 1st & 2nd cutting, we go hammer down on field mowing. Started on a customer that takes 2 days yesterday. This...
-
NAn acquaintance of mine owns a large trucking company in California. He said that when the DPF and DEF became mandated on his trucks...
-
NThat’s right. I have seen more than 1 Gubmit post emissions diesel pickup with NO DPF or DEF. They know it’s BS.
-
NBy far, these are the best cans that I own. https://eagle.justrite.com/safety-cans/type-i-safety-cans Like many of you, I refuse to...
-
Nnumber two reacted to stuckmotor's post in the thread How about a grease cartridge thread? with Good Post.
My first time attempting to fill a cartridge with grease was from a five gallon pail no cartridge and no pump. I tried to hold the...
-
Nnumber two reacted to John0829's post in the thread How about a grease cartridge thread? with Good Post.
Lucas did change the Red n Tacky formula after their plant burned and built the new one. https://www.lucasoil.com/new-red-n-tacky-formula/
-
Nnumber two reacted to jyoutz's post in the thread How about a grease cartridge thread? with Good Post.
The Lucas HD green is far thicker and doesn’t leach oil like the red. It’s all I use.
-
Nnumber two reacted to Alan W.'s post in the thread How about a grease cartridge thread? with Good Post.
All I use since I got a lube shuttle gun. No mess, fuss or drips. Admittedly I do not have to grease a lot but if I was doing a lot of...
-
NI was told by my math teacher when I was in seventh grade that the USA would not convert to metric in a single instance, but it would...
-
NIf we move to metric then what am I going to do with hundreds of these tools? Here is a 1/8 open end wrench on a ruler with scale in...
-
NI have like 5 or 6 cheapy calipers. Both plastic and metal. But I also have two really nice Mitutoyo calipers in both analog and...
-
Nnumber two reacted to deezler's post in the thread M59 Help: Dealer Wants $6K to Replace the Wiring Harness with Good Post.
Seconding the other suggestions that you need to degrease and powerwash the entire machine. Attempting to solve wiring issues on a...
-
Nnumber two reacted to mikester's post in the thread M59 Help: Dealer Wants $6K to Replace the Wiring Harness with Good Post.
Another suggestion: clean up everything and look for dodgey homebrew wiring. WTF is that loose red wire down below doing? Why is your...