number two's latest activity
-
Nnumber two reacted to eKretz's post in the thread Grease - is there no better way? Can we talk about this? with
Good Post.
Lots of differing opinions here, many of which don't take into account the differing states of equipment. One guy says I only use 2... -
Nnumber two reacted to not2old's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
I;m still using an Alemite about the same age. Kids gifted me a Lincoln cordless about ten years back that quit working after about...
-
Nnumber two reacted to OldPaint's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
I think the OP must grease like I paint. I can’t get near a paint brush in any clothing that my wife will allow me to wear in public. I...
-
Nnumber two reacted to bill karrer's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
"Funny Story" Many decades ago, '70s '80s, I worked at an IH dealer. IH claimed they solved the grease problem. They went to all...
-
Nnumber two reacted to walnutman's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
-
Nnumber two reacted to seez52's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
Alls I know is ya don't wanna trip that spring loaded hannel until the top is screwed on good. Woohwee that makes a mess.
-
Nnumber two reacted to neilpaku's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
One option would be to fit an autogreaser. There'd still be grease but you'd deal with it less often. Other than that, you "could"...
-
Nnumber two reacted to Chiefwebb's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
I maintain 3 tractors that require greasing, which I must do. I have some physical impairment so I splurged a few years ago and bought a...
-
Nnumber two reacted to Engineer42's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
Yeah, but your grip strength will be great. Between running grease guns, and pounding in grade stakes with an 8 pound hammer with a 25"...
-
Nnumber two reacted to aa2tn's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
Just leave the cover a bit loose when you install a new tube of grease until the grease comes out the tip then tighten ...
-
Nnumber two reacted to bowenskye's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
I leave the canister, that holds the grease tube, a little loose, so that air can escape.
-
Nnumber two reacted to kneedeep's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
Most GG have a button or a bolt that will ‘burp’ the air out. During hot weather, I keep mine in a bucket upside down as the heat will...
-
Nnumber two reacted to JimR's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
Do not tightened the outer tube all the way in. Release the spring operated rod at the bottom. The air in the tube will purge out. Then...
-
Nnumber two reacted to dkmc's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
I'll answer that.....Way oil......except real way oil has gotten very expensive. I've seen mention of 'bar & chain' oil and always...
-
Nnumber two reacted to Reapoman's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
Grease is like diesel fuel. You cant get within 50' of either without getting it all over yourself.