number two's latest activity
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with
Good Post.
Final baling day before the July monsoon hits. It was a good one. Working by myself, I raked & baled 30+ acres and made 64 bales between... -
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
We have rain returning Monday, so may be back doing some cutting. I moved the 7495 & double mower to the next mowing location.
-
NMany people underestimate the importance of being on level ground. Side to side and front to back is crucial. Another issue I had once...
-
NI hada B7800 and bleeding the system was very easy. Look in the owner's manual for instructions because I don't remember. Don't start...
-
Nnumber two reacted to sandman2234's post in the thread B7800 will not run after rain? with Good Post.
You could be very much correct, however... if the lift pump runs off the gear in the engine, then it requires a good starter and battery...
-
NI’ve now mowed twice for at least two hours each and the heat is staying well below the red! Glad I did the removal, cleaning and...
-
NThe best way is certainly using a subframe backhoe. No question at all on my mind (like the others). The easiest way is probably a...
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
Friday: Back on it. Got another 40 raked & baled…. And stacked…. Saturday (today) and back on it to finish up this sector of...
-
NLike so:
-
NNO to 3 point. Subframe style only.
-
NI don't know anything about them but I'd want a frame mounted verses 3-pt mounted.
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
Got a short window of hot, sunny weather. So quick as I could, I raked & baled about 18 tons of rained on hay. I’m working alone cause...
-
Nnumber two reacted to KWentling's post in the thread Kubota B3350 wont start.... AGAIN with Good Post.
Turn the switch to on, with the tractor in neutral jump the solenoid (the spade terminal) to the battery post on the starter. That...
-
NMy understanding is (and I know it is this way on the smaller BX Kubotas as well as a some John Deeres and others) there is a series...
-
Nnumber two reacted to KubotaGuy810's post in the thread Kubota B3350 wont start.... AGAIN with Good Post.
So I checked all the fuses and all fuses are good. I tested the ignition switch with a multimeter and it was good. I have power at the...