number two's latest activity
-
Nnumber two reacted to herringchoker's post in the thread Loader I Buggered Up My Loader with
Good Post.
Problem found. I may have to fire the guy that installed this. As I suspected, that square section yellow synthetic ring must have been... -
Nnumber two reacted to RjCorazza's post in the thread My B7100 Kubota Tractor loses water dont know year etc with Good Post.
Looks like you'll need the serial number for at least the hst type B7100. As sandman2234 states, Kubota doesn't really use model years.
-
Nnumber two reacted to tacticalturnip's post in the thread Owning a small tractor is a blessing. with Good Post.
Had a nice day today; put the middle-buster through the "garden" plot, thinking it might bring more rocks to the surface. Suffice it to...
-
Nnumber two reacted to mrmikey's post in the thread The Life of a Custom Mowing contractor with Good Post.
Accumulators aren't fun. Fella I worked with hooked up a QA set of forks on a loader and was wondering why the pins weren't locking in...
-
Nnumber two reacted to ultrarunner's post in the thread Your last generator Maintenance Run with Good Post.
You have the unit I had designs on… just the right size and diesel.
-
Nnumber two reacted to bdhsfz6's post in the thread Your last generator Maintenance Run with Good Post.
I was wondering when I should do the next generator maintenance run when the decision was made for me. The power went out yesterday...
-
NHow much oil discrepancy are you seeing from stated capacity to what actually shows on the top line of the dipstick? If you’re talking...
-
NSounds like you either crossed some lines during reassembly or you have crossed the quick disconnects. You may want to double check that.
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
I am going to set a 1,000 gallon tank this winter at a location where a fuel oil truck can fill it up, then fuel my truck bed tank from...
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
It certainly is. I make fuel runs in early morning or after work/mid-evening. I have an 80G fuel cell on my truck. Sometimes we make 2...
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
The Challenger MT535B runs about 5G/hour @ 130HP The Massey 7495 runs about 8G/hour @ 200HP The Challenger 655E runs about 12G/hour @...
-
Nnumber two reacted to Hay Dude's post in the thread The Life of a Custom Mowing contractor with Good Post.
That’s nothing. Baling tractor runs 10-15G per hour. 8 hours of baling could be 100 gallons. More if it’s hilly.
-
NIf there's a range on the dipstick, I always fill to the high side of that range, not the middle of the range.
-
NIt takes a little bit to get use to the shifting of ranges. I do not recall a grease fitting on the linkages. They will loosen with...
-
NHi All, in a post I made a while back when I was deciding between a MX6000 cab and the Grand L. I decided to go with the Grand L 6060...