Recent content by Neil1982

The closes tines to the ones on it i can find are for yanmar tillers. The ones suggested the tines are different. I couldn’t beat the price of this. I got it for only $50.

I have a 48” rototiller that has no marking or stamps on it of any kind. I’m trying to ID it so I can try and get parts for it. Any help in identifying it would be appreciated.

I have reached out to MF and they don’t have anything they can find yet. There still working on it though.

I don't have bolt holes on my frame so i would need to drill through the frame to mount mine. There are holes on the bracket with threaded nuts welded on but no holes on the frame to go into those.

I just got my filter guard for my GC2310 however there was no template or anything for drilling the holes for it. Just curious how you did it?

I know this is a very old thread but I just purchased a GC2310 and i got the filter guard for it but it came with no directions or template for drilling the holes. Anyone still have a template for this or can steer me in the right direction?

I trying to find a new leveling arm for the 3 point on my Shibaura 1540b. Does anyone know if there is an aftermarket one that will work?

So I have replaced the O rings on the piston, honed the cylinder, replaced all O rings in the control valve, flushed all the hydro fluid and put a new screen in and I am still having the issue where it won’t lift. Any one have a suggestion as to what else it could be? Again front loader works...

My 3 point will only lift when cold and at that it will lift and then drop with weight on it. I have replaced the piston O rings and the problem still persisted. Any ideas what else it could be? I have a loader on it and it works perfectly.

Sd1540b

I just purchased a Shibaura 1540b and it was having hydraulic issues caused be a clogged screen. After draining the oil and cleaning the screen the loader works perfectly but the 3 point doesn’t want to lift. It will only lift while cold or if I shut down the tractor for a few min but sometime...