Nedtrox's latest activity

Here is the full circuit schematic for the MF 2600H series tractors.

UPDATE - they split the tractor and removed the clutch assembly. The large snap ring that holds the end plate was gone (presumably...

my rec, for a gauge on a liquid tire, is to use a grease gun hose coupled to a gauge, with a tire valve end on the hose. the liquid...

jack the tyre and rotate to the 1/11 oclock position and remove the valve and let excess drain so the tyre is not over filled. Replace...

I'd recommend you jack the tire off the ground, put the valve stem at 12 o'clock, then remove the stem core until the water stops...

I have a 2016 2606H - 65 hp with 8x8 shuttle and independent PTO (55 hp). I love this tractor, but ... the PTO quit working 3 years...

######### PROBLEMS SOLVED ########## I found out why the engine dies at random whenever the PTO is engaged and have fixed the issue...

This is probably the opposite approach (normally I'd say do the electrical and 'easy' part first.) But in this case my guess is that...

Update: I believe I may have solved the tachometer issue or at the minimum a very strong theory of why the tachometer wasn’t working...

Indeed, I think you might be right CliffordK. Last night I was studying the Circuit Diagram of the electronics on this tractor and it...

Your line of thinking is very similar to what I was thinking after reading he first couple of paragraphs. I'm not sure if the safety...