MtnViewRanch's latest activity

Typically, with non-draft control 3pt hitches, the only reason to use the different pin location on the tractor side is to change how...

Perfect picture ptsg, thank you. Why can't the OP simply use multiple adaptor fittings to accomplish the same exact thing?

A picture or 2 would probably help.

I had that same model on the trailer 20 years ago, built by Midwest Implements. Strapped to the pallet, it weighed 680lbs. Put it behind...

I doubt that you will find a cat 1-2 rear blade that is set up for hydraulics that is light duty. I'm not saying that it has hydraulics...

8' for sure. As heavy as you can afford, nothing under 700lbs, offset, skid shoes, and be sure that the blade can swivel the full 360*...

If you put water bars in and diverted the water off of the road, any chance that that would help? Although the burms make it a pain to...

Added weight equals more traction in 4 wheel drive. Tires tend to not buldge as much with a heavy bucket of material with the smaller...

Roll-over box blades are great (y)(y) and I'm a hydraulics guy. My first question, do you have your tires filled? Filling the tires...

Contact me and this can be resolved. Please look at this link so that you can have the answer for me when you contact me.

Maybe instead of removing your hydraulic top link, simply disconnect it and bungee the hose ends up out of the way. Seems like that...

Using a chain in place of a top link allows the implement to be able to rotate back onto the tractor. I'm not saying that it will, but...

Well, there are some OEM units that are built that way. (JD for example) They think that it is a set place to start from. Supposedly...

Just my opinion, but typically it is best to have tilt to both sides equally. That is how I build all of mine, except the Kubota BX...

Exactly, no good reason to have to compromise. (y)