Recent content by mtg65

  1. M

    Are rocks heavy or what ?

    I used a stone boat before I bought a tractor with FEL. It was very effective in moving large heavy stones. I would roll heavy rocks on to it using a pry bar and would pull the boat with my JD1010 dozer. I found this book: The Art And Craft of Stonescaping: Setting & Stacking Stone very...
  2. M

    Trying to keep gravel where it belongs

    Now that my road is thawed out from this mid-winter break, I am a little concerned about peeling off layer #2 of my gravel road with my rear blade. I've read many posts regarding snow removal on gravel roads and there are a lot of good tips and suggestions out there. I've added skid shoes to my...
  3. M

    Pics of my new Ice Chains

    Here are pics of the chains I put on two weeks ago. I had to fit the chains to my tires which required cutting some of the links but aside from that everything went very smoothly. Some helpful tips to a successful install 1)Research the many posts on TBN regarding this topic Thanks to...
  4. M

    Chains  Chains on R4's

    I have about 1000 feet of gravel driveway, part of which is pretty steep. I have plenty of room to push the snow so I decided to hold off on the snowblower purchase and use the back blade for now. I have read several postings about this method of snow management and to my surprise it worked...
  5. M

    1533 50 hour service

    My 1533 is due for the 50 hour service and wanted to know aside from changing fluids, filters and checking bolts etc.. is there anything else I should be doing / looking for? I will be using MF Permatran III for the Transmission Fluid but not sure what brand to use for the engine oil. For the...
  6. M

    Box Scaper Questions

    I just got a woods GB72 box scraper and I had a blast yesterday redoing my gravel road. I had a lot of good material to work with - several years of bringing in one or two loads here and there over the last several years. I was keeping things level with a JD1010 dozer which worked OK but took...
  7. M

    Welders advice..

    I have a brand new MF1533 with a 1525 FEL. I just noticed what looks like a crack in the weld on the lower right arm. I attached pics…any opinions or advice? Thanks
  8. M

    My New MF1533

    Thanks to everyone in this forum for your insight. It helped me decide on MF1533 PowerShuttle with FEL and quick detach bucket.I've had the tractor for only a week and I am extremely pleased with the power and performance. I am looking for some additional information and advice... 1) Are the...
Top